To protect the hose against external abrasion and mechanical damage. For use in applications where maximum external protection is required with minimum extra hose weight.
A lightweight black, HDPE (High Density Poly Ethylene) strip spirally wound around the outside of the hose over its whole length, secured to each end fitting by crimping under a SS ferrule.
Safegard is applicable to all hose grades and all hose sizes from 1/2” up to 2”.
Safegard is limited to use within a temperature range from -40˚C (-40˚F) up to +110˚C (230˚F). Internal fluid temperatures up to 140˚C (284˚F) are acceptable, when external temperatures are ambient.
The minimum hose assembly length must be doubled if Safegard is being used. The maximum assembly lengths for all sizes are capped at 20 metres (65 feet).
Other hose usage limitation specifications are not altered by the addition of Safegard.
Safegard is available with anti-static properties and complies with the requirements of a static-dissipative cover within EN 16643. Request details upon enquiry.
For medium duty applications where the hose requires some protection against abrasion when dragged over the ground, but where a full rubber cover would be too heavy and cumbersome.
Specially moulded abrasion resistant rubber scuff rings are placed every half metre along the hose.
Available for hose sizes 1” (25mm) to 2” (50mm) only. The operating temperature should not exceed 140˚C (284˚F) (internal).
For applications where the hose requires protection against abrasion when dragged over the ground, but where any rubber reinforcement is not permissible due to temperature, chemicals etc.
A stainless steel wire helix is wound onto the braid and welded to the ferrules at each end.
Available for all sizes and Grades of FaBLINE hose including rubber covered grades.
Maximum assembly lengths for all sizes are capped at 30 metres (100 feet).
As for the relevant Hose Grade.