PTFE Lined
Description
DIN11851 male and female fittings, integral PTFE lined and flared. The PTFE sealing face is hot moulded into the correct shape, designed to achieve the optimum pressure seal.
Specifications
- Generally to German DIN 11851 specifications.
End Fitting Materials
- Spigots in Grade 316L SS (Non-Lined Spigot in 1.4571)
- Nuts in Grade 304 SS
- Ferrules, most in Grade 304 SS, some sizes in Grade 316L SS
Temperature & Pressure Ratings
- Sizes up to 11/2” MWP = 40 Bar (580 psi) up to 140˚C (284˚F)
- Sizes 2” to 3” MWP = 25 Bar (360 psi) up to 140˚C (284˚F)
Except: where the applicable hose pressure/temperature ratings are lower
- See Sizes, Grades, Pressures & Weights.
Note: The PTFE lined male fitting is designed to be used without a rubber seal. Please note that when connecting to a PTFE Lined DIN 11851 Male, extra spanner tightening of the nut is sometimes required in order to provide a leak free connection.
PTFE Lined DIN11851 Female Fitting
PTFE Lined DIN11851 Male Fitting
| Nominal Hose Size | Lined DIN11865 | |
|---|---|---|
| in | Male | Female |
| 1/4 | - | - |
| 3/8 | - | - |
| 1/2 | 58 | 51 |
| 5/8 | - | - |
| 3/4 | 62 | 55 |
| *7/8 | - | - |
| 1 | 76 | 70 |
| 11/4 | 70 | 64 |
| *13/8 | - | - |
| 1 1/2 | 72 | 76 |
| *17/8 | - | - |
| 2 | 88 | 90 |
| 21/2 | 150 | 132 |
| 3 | 162 | 140 |
* Fitting Lengths listed are for Bioflex Ultra RC, SI and BK hose grades. Shorter lengths apply for other hose grades.