Female

End Fitting Specifications

  • Generally in accordance with A-A-59326 (replaces MIL-C-27487) and EN14420-1 (replaces DIN 2828), and all are fully interchangeable.

End Fitting Materials

  • Spigot in Grade 316L SS
  • Body in Grade 316C SS
  • Ferrules, most in Grade 304 SS, some sizes in Grade 316L SS
  • Standard Gasket is Buna N (Nitrile) Rubber.
  • FEP encapsulated Silicone Rubber Gaskets also available.

Surface Finish: (Non-Lined Fittings only)

  • All surface finishes are to ASME BPE-SF-O (No finish required).
  • If a specified finish on a particular surface is required, please state on the enquiry and order.

Temperature and Pressure Ratings

  • When used with a Buna N Gasket all sizes up to 16 Bar (230 psi) and up to a maximum temperature of 65˚C (149˚F)
  • When used with FEP, Fluoro Rubber or other encapsulated gaskets all sizes up to 10 Bar (145 psi) and up to a maximum temperature of 204˚C (400˚F). 

90˚Elbow Cam & Groove Fittings (PTFE Lined Only)

  • 90˚ Elbow Integral PTFE lined Cam & Groove Fittings are available for sizes 1”, 11/2” and 2” - see 90˚ Elbow Fittings.

Notes: For Integral PTFE Lined Fittings Only

  • FEP Gaskets require higher clamping forces to flatten the Seal and make the joint. This is made easier by “pre-setting” these gaskets by clamping Polypropylene Cam Male Inserts to the assembled fittings, which must then be kept in place during storage, until use.
  • Any Customer’s Own “Special” Gaskets must be pre-supplied to Aflex for special assembly and testing of hose assemblies, to ensure suitability.

 

Swivelling, Locking Arm Female Cam and Groove Fittings
- Non-Lined

Nominal Hose Size Non-lined Locking Arm Female Cam and Groove
in
1/4 -
3/8 -
1/2 -
5/8 -
3/4 53
*7/8 -
1 59
11/4 64
*13/8 -
1/2 67
*17/8 -
2 79
21/2 76
3 71

Fixed or Swivelling, Locking Arm Female Cam and Groove Fitting
- Integral PTFE Lined

 

Nominal Hose Size Lined Locking Arm Female Cam and Groove
in
1/4 -
3/8 -
1/2 -
5/8 -
3/4 55
*7/8 -
1 69
11/4 66
*13/8 -
1/2 66
*17/8 -
2 75
21/2 135
3 138

 * Fitting lengths listed are for FaBLINE RC and SI hose grades.