If required, Corroflon Hose Assembly can be defined by an individual Part Number, made up of 7 entries as below:
| Hose Size | Size Part No. |
|---|---|
| 1/2” | 08 |
| 3/4” | 12 |
| 1” | 16 |
| 11/4” | 20 |
| 11/2” | 24 |
| 2" | 32 |
| 2 1/2" | 40 |
| 3" | 48 |
| 4" | 64 |
| 6" | 96 |
| Hose Type | Type Part No |
|---|---|
| Corroflon GP (Natural PTFE Liner) | CFLN/GP |
| Corroflon AS (Antistatic PTFE Liner) | CFLN/AS |
| Braid and Cover | |
|---|---|
| Table Only | TO |
| Stainless Steel Braid
|
SS |
| Polypropylene Braid
|
PB |
| Hastelloy Braid
|
HB |
| Kynar (PVDF) Braid
|
KYB |
| Black EPDM Rubber Cover (on SS)
|
RC |
| Transparent Silicone Rubber (on SS)
|
SI |
| Red Fireproof EPDM Rubber (on SS)
|
FP |
| External Protection Systems | |
|---|---|
| No External Protection System
|
OO |
| S/S Wire Protection Coil | SR |
| Rubber Anti-Scuff Rings | SR |
| Safegard HDPE Spiral Wrap | SG |
| Length |
|---|
| The overall hose length between the sealing faces at each end is given as the Length Part No, either in decimal Metres followed by “m” or Inches followed by “in”. |
| Assembled End Fitting Description * All Components in Stainless Steel |
End Fitting Part No. |
|---|---|
| JIC Female | 02 |
| Fixed Male Pipe, NPT Thread | 03 |
| Fixed Male Pipe, BSPT Thread | 03/B |
| Fixed Female Pipe, NPT Thread | 06 |
| JIC-to-NPT Male Union | 08 |
| JIC-to-Female Union | 08F |
| Straight Sanitary Tri Clamp, 1.984” Diameter 0.870” Exit Diameter (Standard) 1.370” Exit Diameter (Step-Up) |
- 10 10/S |
| Straight Mini Sanitary Tri Clamp, 0.984” Diameter 0.370” Exit Diameter (Standard) 0.625” Exit Diameter (Step-Up) |
- 11 11/S |
| *ANSI 150# Swivelling Flange Non-Lined | 12 |
| DIN PN 10/16 Swivelling Flange Non-Lined | 12/PN |
| *ANSI 150# Swivelling Flange, PTFE Lined | 12L |
| DIN PN 10/16 Swivelling Flange, PTFE-Lined | 12/PN |
| Cam and Groove, Locking Arm Swivelling Female, Non-Lined | 16 |
| Cam and Groove Locking Arm Female, PTFE Lined | 16L |
| Cam and Groove Male, Non-Lined | 17 |
| Cam and Groove Male, PTFE Lined | 17L |
| DIN 11851 Female, PTFE Lined | 23L |
| DIN 18851 Male, PTFE Lined | 24L |
| SMS Female, PTFE Lined | 26L |
| RJT Female, Non-Lined | 27 |
| BSPP Cone Seat Female | 33 |
| BSP Lug Nut Female | 34 |
*For flange only, Carbon Steel Zinc Plated, add “/ZP” or Epoxy coated add “/EC”
Notes:
TRICLAMPS: For “Hot Formed” PTFE Lined Triclamps add “/HF”
Example:
A ¾” bore Corroflon GP, RC Hose Assembly with an Antistatic PTFE Liner and an outer Safegard sleeve.
End (1) - a 3/4” ANSI 150# Swivel Flange, PTFE Lined
End (2) - a Cam and Groove Swivelling Female, PTFE Lined
Length - 4ft 6 inches
Hose Assembly Part No. = 12 - CFLN/AS - RC - SG - 54in - 12L - 16L
Any additional requirements which are not included in the Part Number must be written out in full in the Order, including any special labelling or colour coding
* Note - if one of the rubber end protection systems is required, for one or both ends, please define the requirement in writing in addition to the Part Number.
