PTFE lined & flared Fittings

End Fitting Specification

  • BS4825 Pt 3 (UK)
  • ASME BPE-a-2007 (USA)
  • DIN32676 Type C (Europe, DN Sizes)

Temperature and Pressure Ratings

  • Pressures up to 16 Bar (230 psi)
  • Temperatures up to 180˚C (356˚F)
  • Higher Pressures & Temperatures possible with Special Clamps and appropriate Seals.

End Fitting Materials

  • Fittings in Grade 316L SS (= BS 316 S11 = EN 1.4404)
  • Ferrules, most in Grade 304 SS, some sizes in Grade 316L SS

90˚ Elbows

PTFE Lined 90˚ elbow fittings are available for some sizes and grades

Nominal Hose Size Nominal Pipe Size Fitting Outlet Flange Diameter D *Length of Fitting A Weight of Fitting 
in mm in mm in mm in mm in mm Kg Lbs
1/2  15 1/2 12.7 3/8 9.5 0.984 25.0 1.96 50 0.075 0.17
1 25 1 25.4 7/8 22.2 1.984 50.5 2.36 60 0.294 0.650
1 1/2 40  11/2 38.1 13/8 34.9 1.984 50.5 2.48 63 0.393 0.866
2 50  2 50.8 17/8 47.6 2.516 64.0 2.60 66 0.523 1.150
2 1/2 65  21/2 63.4 23/8 60.3 3.050 77.5 3.22 82 0.752 1.660
3 80 3 76.1 27/8 73.0 3.580 91.0 3.22 82 1.021 2.250
4 100 4 101.6 33/4 96 4.680 119 4.88 124 2.269 5.000

*Fitting Lengths listed are for Corroflon braided only hose grades (SS, PB, HB, KYB). Approximately 33% longer lengths apply to the rubber covered hose grades (RC, SI, FP).