|
SPECIFICATIONS FOR VISIFLON HOSE GRADES
Note: Specifications listed below are for non-AS Grades. For AS Grades the specifications are all the same, except that 'AS' is added to the Grade Reference, and the Part Number reads '-110-' in place of '-100-'.
Nominal
Hose
Size |
*Actual Hose
Bore Size |
Hose Grade |
Outside
Diameter
of Tube
or Braid |
Minimum
Bend
Radius |
Maximum
Working
Pressure
(MWP) |
Weight per
Unit Length |
Hose Part
Number |
| in |
mm |
in |
|
mm |
in |
mm |
in |
Bar |
psi |
kg/mtr |
lbs/ft |
|
| 3/8 |
6.3 |
1/4 |
TO |
10.70 |
0.420 |
25 |
1 |
4 |
58 |
.057 |
.038 |
71-100-06 |
| SS |
11.95 |
0.470 |
19 |
3/4 |
60 |
870 |
.144 |
.096 |
71-100-06-01-02 |
| PB |
13.00 |
0.512 |
25 |
1 |
30 |
435 |
.091 |
.061 |
71-100-06-01-21 |
| 1/2 |
9.5 |
3/8 |
TO |
14.10 |
0.555 |
38 |
1 1/2 |
4 |
58 |
.076 |
.051 |
71-100-08 |
| SS |
15.25 |
0.600 |
25 |
1 |
47 |
680 |
.195 |
.130 |
71-100-08-01-02 |
| PB |
16.80 |
0.662 |
38 |
1 1/2 |
23.5 |
340 |
.125 |
.084 |
71-100-08-01-21 |
| 5/8 |
12.7 |
1/2 |
TO |
19.80 |
0.780 |
50 |
2 |
4 |
58 |
.126 |
.084 |
71-100-10 |
| SS |
21.20 |
0.835 |
38 |
1 1/2 |
40 |
580 |
.296 |
.194 |
71-100-10-01-02 |
| PB |
23.00 |
0.906 |
50 |
2 |
20 |
290 |
.188 |
.126 |
71-100-10-01-21 |
| 3/4 |
16.0 |
5/8 |
TO |
21.20 |
0.835 |
75 |
3 |
3 |
43 |
.166 |
.111 |
71-100-12 |
| SS |
22.70 |
0.894 |
50 |
2 |
32 |
460 |
.376 |
.251 |
71-100-12-01-02 |
| PB |
24.70 |
0.973 |
63 |
2 1/2 |
16 |
230 |
.226 |
.151 |
71-100-12-01-21 |
| 1 |
22.0 |
7/8 |
TO |
29.00 |
1.143 |
89 |
3 1/2 |
3 |
43 |
.235 |
.157 |
71-100-16 |
| SS |
30.60 |
1.204 |
63 |
2 1/2 |
26 |
380 |
.533 |
.310 |
71-100-16-01-02 |
| PB |
32.90 |
1.300 |
75 |
3 |
13 |
190 |
.314 |
.210 |
71-100-16-01-21 |
| 1 1/4 |
28.0 |
1 1/8 |
TO |
34.20 |
1.349 |
100 |
4 |
2 |
29 |
.342 |
.229 |
71-100-20 |
| SS |
36.00 |
1.420 |
75 |
3 |
25 |
360 |
.729 |
.489 |
71-100-20-01-02 |
| PB |
39.00 |
1.537 |
89 |
3 1/2 |
12.5 |
180 |
.444 |
.298 |
71-100-20-01-21 |
| 1 1/2 |
35.0 |
1 3/8 |
TO |
45.00 |
1.773 |
150 |
6 |
2 |
29 |
.415 |
.278 |
71-100-24 |
| SS |
47.00 |
1.850 |
115 |
4 1/2 |
20 |
300 |
1.044 |
.699 |
71-100-24-01-02 |
| PB |
50.00 |
1.970 |
130 |
5 |
10 |
150 |
.600 |
.402 |
71-100-24-01-21 |
| 2 |
47.0 |
1 7/8 |
TO |
59.00 |
2.325 |
200 |
8 |
2 |
29 |
.631 |
.423 |
71-100-32 |
| SS |
61.00 |
2.400 |
130 |
5 |
15 |
220 |
1.378 |
.923 |
71-100-32-01-02 |
| PB |
64.00 |
2.521 |
150 |
6 |
7.5 |
110 |
.917 |
.614 |
71-100-32-01-21 |
*Visiflon Hose assemblies require that the convolutions at the ends of the hose are opened out to accept either Hydraulic or PTFE Tail end fittings.
Note: Many of the sizes of hose and fittings listed in this brochure are available as ex-stock items and are priced accordingly. However, some of the less popular items are not always in stock, and may therefore incur a minimum order charge or a set-up charge for smaller quantities. Aflex Hose will advise when the enquiry is made.
PROPERTIES
Temperatures and Pressures :
- Visiflon TO Grades - The MWP listed above applies up to a maximum temperature of 100°C (212°F).
- Visiflon SS Grades - The MWP listed above should be reduced by 1% for each 1°C above 130°C up to a maximum of 230°C (1% for each 1.8°F above 266°F up to a maximum of 445°F).
- Visiflon PB Grades - The MWP listed should be reduced by 5% for each 1°C above 80°C up to a maximum of 100°C (5% for each1.8°F above 176°F to 212°F).
Vacuum Resistance :
Visiflon SS Grades are fully vacuum resistant up to 130°C (266°F).
Visiflon TO and PB Grades are fully vacuum resistant up to 80°C (176°F).
Flow Rates :
The internal convolutions restrict flow rates due to turbulent flow, and may also cause a whistling noise when gases are passed through. For any applications where this may be a problem, the alternative Aflex Hose products Hyperline FX or Corroline would provide a solution.
|
