|
PTFE TAIL END FITTINGS FOR SW AND HW GRADES
Aflex Hose keep in stock a wide range of 'PTFE-tail' design standard end fittings, ferrules and adaptors in both zinc plated carbon steel and 316L stainless steel.
These are specified, with the relevant Aflex Hose Part Number, on the next page.
PTFE-Tail End Fittings can only be applied to the Standard Smoothbore, Standard Wall (SW) and Heavy Wall (HW) Hose Grades.
HYDRAULIC-TAIL END FITTINGS FOR MW AND HI GRADES
These can only be used with the Standard Smoothbore, Medium Wall (MW) and the High Pressure (HI) Hose Grades.
Hydraulic Tail end fittings are usually sourced from local Hydraulic Suppliers, but can be supplied by Aflex Hose if required.
Ferrules for MW, SB and MW, HI Hose can be supplied by Aflex Hose, as below.
Ferrule Sizes and Part Numbers
MW, SB
Hose |
Zinc Plated
Carbon Steel |
Stainless
Steel |
| 3/16"BB -4 |
01-170-03-03-04 |
01-170-03-03-03 |
| 1/4"BB -5 |
01-170-04-04-04 |
01-170-04-04-03 |
| 5/16"BB -6 |
01-170-05-05-04 |
- |
| 3/8"BB -8 |
01-170-06-06-04 |
01-170-06-06-03 |
| 1/2"BB -10 |
01-170-08-08-04 |
01-170-08-08-03 |
| 5/8"BB -12 |
01-170-10-10-04 |
01-170-10-10-03 |
| 3/4"BB |
01-170-12-12-04 |
01-170-12-12-03 |
| 1"BB |
01-170-16-16-04 |
01-170-16-16-03 |
|
MW, HI
Hose |
Stainless
Steel |
| 3/16"BB -4 |
70-300-04-03-02 |
| 5/16"BB -6 |
70-300-06-03-02 |
| 3/8"BB -8 |
70-300-08-03-02 |
| 1/2"BB -10 |
70-300-10-03-02 |
|
SPECIAL, LONG TAIL FITTINGS FOR VHI GRADE
The Very High Pressure (VHI) Grade hose requires special fittings with long tails and special ferrules, to ensure that the assembled fittings can withstand the very high burst pressures.
These fittings and ferrules are made and supplied to special order.
|
Products 
