DESIGN 

Hose Liner : Seamless extruded PTFE tube, made exclusively from ¹Teflon 62 or ²Fluon CD086 PTFE polymer.  The choice of these grades, together with the extrusion, heat treatment and quality control programmes are designed to produce the best quality PTFE tube possible, ensuring minimum porosity and maximum flexibility.

Hose Braid : Braided from AISI grade 304 stainless steel wire, bright hard drawn to a minimum 1700 N/mm2 tensile strength.  The braiding process is closely controlled to ensure even tension and the correct braid angle to give minimum expansion/contraction under pressure.

STYLE RANGES

SW (Standard Wall) :  For general purpose use, including high & low pressure steam, chemicals, paints, inks adhesives, fuels, oils, detergents, refrigerants and foodstuffs.

HW (Heavy Wall) : For heavy duty use also for use with gases up to 150 Bar pressure and for hot/cold cycling applications.

'Dash' : For general purpose use and used with hydraulic end fittings which require a slightly larger hose bore than the standard sizes above, to permit the insertion of the end fittings into the hose bore (see our Hydraline Range - Hydraline SB for more details)

 ¹ Registered Trademark for the fluoropolymer resin from Du Pont

² Registered Trademark for the fluoropolymer resin from ICI