|
SPECIFICATIONS FOR HYPERLINE FX HOSE GRADES
Note: Specifications listed below are for non-AS Grades. For AS Grades the specifications are all the same, except that 'AS' is added
to the Grade Reference, and the Part Number reads '-110-' in place of '-100-'.
Nominal
Hose
Size |
*Actual Hose
Bore Size |
Hose Grade |
Outside
Diameter
of Tube
or Braid |
Minimum
Bend
Radius |
Maximum
Working
Pressure
(MWP) |
Weight per
Unit Length |
Hose Part
Number |
| in |
mm |
in |
|
mm |
in |
mm |
in |
Bar |
psi |
kg/mtr |
lbs/ft |
|
| 1/4 |
6.8 |
0.270 |
TO |
9.0 |
0.354 |
38 |
1 1/2 |
4 |
60 |
.041 |
.027 |
92-100-04 |
| SS |
9.6 |
0.378 |
19 |
3/4 |
88 |
1280 |
.092 |
.062 |
92-100-04-01-02 |
| AM |
9.6 |
0.378 |
38 |
1 1/2 |
62 |
900 |
.056 |
.038 |
92-100-04-01-55-01 |
| 5/16 |
7.9 |
0.312 |
TO |
10.0 |
0.394 |
38 |
1 1/2 |
4 |
60 |
.056 |
.037 |
92-100-05 |
| SS |
10.6 |
0.420 |
19 |
3/4 |
84 |
1220 |
.126 |
.084 |
92-100-05-01-02 |
| AM |
10.6 |
0.420 |
38 |
1 1/2 |
59 |
850 |
.075 |
.050 |
92-100-05-01-55-01 |
| 3/8 |
10.0 |
0.394 |
TO |
12.5 |
0.492 |
50 |
2 |
4 |
60 |
.070 |
.047 |
92-100-06 |
| SS |
13.5 |
0.534 |
25 |
1 |
80 |
1160 |
.160 |
.107 |
92-100-06-01-02 |
| AM |
13.5 |
0.534 |
50 |
2 |
56 |
810 |
.100 |
.067 |
92-100-06-01-55-01 |
| 1/2 |
13.6 |
0.536 |
TO |
16.2 |
0.640 |
76 |
3 |
4 |
58 |
.110 |
.074 |
92-100-08 |
| SS |
17.5 |
0.690 |
38 |
1 1/2 |
60 |
870 |
.225 |
.151 |
92-100-08-01-02 |
| AM |
17.5 |
0.690 |
76 |
3 |
42 |
600 |
.140 |
.094 |
92-100-08-01-55-01 |
| 5/8 |
16.7 |
0.658 |
TO |
20.0 |
0.787 |
100 |
4 |
3 |
44 |
.161 |
.108 |
92-100-10 |
| SS |
21.4 |
0.843 |
50 |
2 |
50 |
730 |
.336 |
.226 |
92-100-10-01-02 |
| AM |
21.4 |
0.843 |
100 |
4 |
35 |
510 |
.204 |
.137 |
92-100-10-01-55-01 |
| 3/4 |
19.8 |
0.780 |
TO |
23.2 |
0.913 |
126 |
5 |
3 |
44 |
.179 |
.120 |
92-100-12 |
| SS |
24.2 |
0.953 |
63 |
2 1/2 |
42 |
610 |
.383 |
.257 |
92-100-12-01-02 |
| AM |
24.2 |
0.953 |
126 |
5 |
29 |
430 |
.236 |
.158 |
92-100-12-01-55-01 |
| 1 |
26.4 |
1.040 |
TO |
30.3 |
1.193 |
150 |
6 |
2 |
29 |
.268 |
.180 |
92-100-16 |
| SS |
31.7 |
1.250 |
75 |
3 |
40 |
580 |
.540 |
.362 |
92-100-16-01-02 |
| AM |
31.7 |
1.250 |
150 |
6 |
28 |
400 |
.354 |
.237 |
92-100-16-01-55-01 |
*Hydraulic Bore Size - The actual bore sizes of Hyperline FX hose are slightly larger than the norminal size, to allow the insertion
and assembly of standard Hydraulic Fittings, using ferrules supplied by Aflex Hose.
PROPERTIES
Temperatures and Pressures :
- Hyperline FX, SS Grades - The MWP listed above should be reduced by 1% for each 1°C above 160°C (1% for each 1.8°F above
320°F) up to a maximum of 260°C (500°F).
- Hyperline FX, AM Grades - The MWP listed above should be reduced by 1% for each 1°C above 130°C (1% for each 1.8°F above
266°F) up to a maximum of 180°C (356°F).
Vacuum Resistance :
Hyperline FX, SS Grades are fully vacuum resistant up to 130°C (266°F).
Excellent Flow Rates :
Compared with conventional convoluted hose designs, Hyperline FX has excellent flow rates due to the smooth bore, which prevents
the turbulent fluid flow which occurs in convoluted hose products.
Reduced Diffusion Rates :
Hyperline FX is much more resistant to diffusion of liquids or gases than other PTFE hose products, due to its highly compressed,
non-porous PTFE matrix. Hyperline FX has been successfully tested to SAE J1737 for resistance to automotive fuel diffusion.
Non-Stick Internal Surface :
Hyperline FX hose has a smooth bore, non-stick liner which is effectively 'self-cleaning', and which resists material build-up inside
the hose which may cause bore constriction.
|
Products 
