|
DOUBLE RUBBER COVER END PROTECTION - DRC300
Purpose
In applications where the hose assembly will be flexed
excessively at the end fitting, to prevent kinking of the hose
in this area.
Design
A second layer of rubber is applied and vulcanised directly
on to the hose and the end fitting ferrule, 12" (300mm)
along the hose from the fitting.
Available for Grades SS and RC, not for Grade PB.
SAFEGARD HDPE SPIRAL WRAP PROTECTION - SG
Purpose
To protect the hose from excessive external abrasion and
mechanical damage in rough applications.
Design
A lightweight black HDPE (High Density Poly Ethylene)
'Safegard' strip is spirally wound along the hose and
secured by crimping at each end.
Available for all Corroline Hose Grades.
Limitations
Temperature Range -40°F (-40°C) up to 212°F (100°C).
The minimum hose assembly length must be doubled, if Safegard is being used.
STAINLESS STEEL WIRE PROTECTION COIL - PC
Purpose
To protect the hose from excessive external abrasion and
mechanical damage in rough applications without the
temperature limitations which apply to the Safegard sleeve.
Design
A large diameter stainless steel wire is spirally wrapped on
to the rubber cover, and welded to the ferrule at each end.
Available for all Corroline Hose Grades.
|
