End Fitting Specification
- SAE J514 37° Flare JIC Female Fitting
- 37° JIC Male-to-NPT Male/Female Adaptors
- NPT Threads to ANSI B2.1

Temperature and Pressure Ratings
Same Maximum Working Pressure and Temperature as for the relevant size of Corroline Hose.

End Fitting Materials
- Spigots in Grade 316
- Nuts in 316L SS
- Ferrules, most in Grade 304 SS, some sizes in Grade 316L SS

Note - Not usable with SAE 45° Flare fittings which have the same thread.

Alternatives - Can be supplied in other materials, such as zinc plated carbon steel, Hastelloy, Monel etc.

37° JIC FEMALE FITTING
Nominal Hose Size		37° JIC Thread Size	*Fitting Length A		Fitting Inside Diameter I
in	mm	in	in	mm	in	mm
1/2	13	3/4 - 16	2.76	70	0.38	9.5
3/4	20	1 1/16 - 12	3.07	78	0.63	15.9
1	25	1 5/16 - 12	3.23	82	0.80	20.2
1 1/2	40	1 7/8 - 12	4.00	102	1.25	31.7
2	50	2 1/2 - 12	4.33	110	1.75	44.4

*Fitting Lengths listed are for RC Grade Hose end fittings. SS and PB Grades end fittings are shorter in length.

JIC TO NPT MALE UNION INCLUDING A JIC MALE-TO-NPT MALE ADAPTOR				JIC TO NPT FEMALE UNION INCLUDING A JIC MALE-TO-NPT FEMALE ADAPTOR
Nominal Hose Size		*Male Union Length A1		*Female Union Length A2		Fitting Inside Diameter I
in	mm	in	mm	in	mm	in	mm
1/2	13	4.13	105	4.25	108	0.38	9.5
3/4	20	4.92	125	4.80	122	0.63	15.9
1	25	5.43	138	5.12	130	0.80	20.2

*Fitting Lengths listed are for RC Grade Hose end fittings. SS and PB Grades end fittings are shorter in length.