|
End Fitting Specification
- Generally in accordance with A-A-59326 (replaces MIL-C-27487) and EN14420-7-2004 (replaces DIN 2828), and all are fully interchangeable.
Temperature and Pressure Ratings
- All sizes up to 16 Bar (230 psi)
- Up to 100°C (212°F) Buna N Gasket or 200°C (400°F) FEP Gasket.
End Fitting Materials
- Spigot in Grade 316L SS
- Body in Grade 316C SS
- Ferrules, most in Grade 304 SS, some sizes in Grade 316L SS
- Standard Gasket is Buna N (Nitrile) Rubber
- FEP Encapsulated Silicone Rubber Gaskets also available.
90° Elbow Cam & Groove Fittings (LINED ONLY)
90° Elbow Integral PTFE lined Cam & Groove Fittings are available for sizes 1", 1 1/2" and 2".
Notes: For Integral PTFE Lined Fittings Only
FEP Gaskets require higher clamping forces to flatten the seal and make the joint. This is made easier by 'pre-setting' these gaskets by clamping Polypropylene Cam Male inserts to the assembled fittings, which must then be kept in place during storage, until use.
Any Customers Own 'Special' Gaskets must be pre-supplied to Aflex for special assembly and testing of hose assemblies, to ensure suitability.
Swivelling, Locking Arm Female Cam and Groove Fittings - Non Lined
 
Nominal
Hose Size |
*Fitting Length
A (Bioflex RC) |
Cam Sleeve Inside
Diameter D |
Fitting Inside
Diameter I |
| in |
mm |
in |
mm |
in |
mm |
in |
mm |
| 3/4 |
20 |
3.22 |
82.0 |
1.260 |
32 |
0.625 |
15.88 |
| 1 |
25 |
3.39 |
86.5 |
1.456 |
37 |
0.797 |
20.24 |
| 1 1/2 |
40 |
3.97 |
101.0 |
2.126 |
54 |
1.25 |
31.75 |
| 2 |
50 |
4.09 |
104.0 |
2.520 |
64 |
1.75 |
44.45 |
Fixed or Swivelling, Locking Arm Female Cam and Groove Fitting - Integral PTFE Lined
 
Nominal
Hose Size |
*Fitting Length
A (Bioflex RC) |
Cam Sleeve Inside
Diameter D |
Fitting Inside
Diameter I |
| in |
mm |
in |
mm |
in |
mm |
in |
mm |
| 3/4 |
20 |
2.155 |
54.74 |
1.260 |
32.0 |
0.75 |
19.0 |
| 1 |
25 |
2.716 |
69.00 |
1.456 |
37.0 |
1.00 |
25.0 |
| 1 1/2 |
40 |
2.612 |
66.35 |
2.126 |
54.0 |
1.50 |
38.0 |
| 2 |
50 |
2.966 |
75.35 |
2.520 |
64.0 |
2.00 |
50.0 |
*Fitting Lengths listed are for Bioflex RC,SI and FP hose grades. Shorter lengths apply for other hose grades.
|
