Single Braid Hose

Specifications and Size Range

For Single Stainless Steel wire braid hose, for Standard Grade and AS Grade

Standard Wall, Single Braid (SW,SB)

Bore Size (Nominal) Bore Size (Actual) PTFE Tube Wall Thickness Braid Outside Diameter Minimum Bend Radius Maximum Working Pressure Weight per Unit Length *Part Number
mm in mm in mm in mm in Bar psi KG/mt Lbs/Ft
1/8 3.17 0.125 0.76 0.030 5.85 0.230 22 7/8 290 4220 .065 .044 70-100-02-01-02
3/16 4.76 0.188 0.76 0.025 7.40 0.291 40 15/8 265 3856 .080 .054 70-100-03-01-02
1/4 6.35 0.250 0.63 0.025 8.50 0.335 60 23/8 240 3492 .093 .062 70-100-04-01-02
5/16 7.94 0.313 0.63 0.025 10.15 0.400 70 27/8 200 2910 .110 .074 70-100-05-01-02
3/8 9.53 0.375 0.63 0.025 11.75 0.463 80 32/8 190 2765 .124 .083 70-100-06-01-02
1/2 12.70 0.500 0.76 0.030 14.95 0.589 110 43/8 140 2030 .207 .139 70-100-08-01-02
5/8 15.88 0.625 0.76 0.030 18.35 0.722 150 6 110 1601 .255 .171 70-100-10-01-02
3/4 19.05 0.750 0.76 0.030 21.65 0.852 200 77/8 80 1164 .315 .211 70-100-12-01-02
1 25.40 1.000 1.00 0.039 28.15 1.108 300 117/8 55 800 .430 .288 70-100-16-01-02

 

Heavy Wall, Single Braid (HW, SB)

Bore Size (nominal) Bore Size (Actual) PTFE Tube Wall Thickness Braid Outside Diameter Minimum Bend Radius Maximum Working Pressure Weight per Unit Length *Part Number
mm in mm in mm in mm in Bar psi KG/mt Lbs/Ft
1/8 3.17 0.125 1.00 0.039 6.10 0.240 20 7/8 290 4220 .068 .046 70-200-02-01-02
3/16 4.76 0.188 1.00 0.039 7.65 0.301 29 11/8 270 3929 .087 .058 70-200-03-01-02
1/4 6.35 0.250 1.00 0.039 9.25 0.364 30 12/8 260 3783 .113 .076 70-200-04-01-02
5/16 7.94 0.313 1.00 0.039 10.90 0.429 40 15/8 230 3347 .135 .091 70-200-05-01-02
3/8 9.53 0.375 1.00 0.039 12.50 0.492 55 22/8 200 2910 .153 .103 70-200-06-01-02
1/2 12.70 0.500 1.00 0.039 15.60 0.614 85 33/8 160 2328 .240 .161 70-200-08-01-02
5/8 15.88 0.625 1.30 0.051 19.10 0.752 110 43/8 130 1892 .292 .196 70-200-10-01-02
3/4 19.05 0.750 1.30 0.051 22.05 0.868 145 56/8 92 1339 .344 .231 70-200-12-01-02
1 25.40 1.000 1.50 0.059 28.80 1.134 260 102/8 69 1004 .470 .315 70-200-16-01-02

 

Medium Wall Single Braid (MW, SB), also referred to as Hyperline SB

The Hyperline MW, SB Range meets or exceeds SAE 100R14 standard.

Bore Size (Nominal)
BB = Big Bore
Bore Size (Actual) Dash Size Reference (if any) PTFE Tube Wall Thickness Braid Outside Diameter Minimum Bend Radius Maximum Working Pressure Weight per Unit Length *Part Number
mm in mm in mm in mm in Bar psi Kg/mt Lbs/Ft
1/16 BB 2.0 0.079 -2 1.00 0.040 5.00 0.197 13 1/2 450 6500 .045 .030 70-300-02-01-02
1/8 BB 3.5 0.138 -3 1.00 0.040 6.45 0.254 20 3/4 350 5076 .070 .047 70-300-03-01-02
3/16 BB 5.0 0.200 -4 0.76 0.030 7.65 0.301 45 13/4 290 4206 078 .052 70-400-03-01-02
1/4 BB 6.7 0.264 -5 0.76 0.030 9.30 0.366 60 23/8 240 3480 .110 .074 70-400-04-01-02
5/16 BB 8.4 0.335 -6 0.76 0.030 10.72 0.422 70 23/4 220 3190 .136 091 70-400-05-01-02
3/8 BB 10.0 0.394 -7 0.76 0.030 12.75 0.500 80 3 190 2755 .166 .111 70-400-06-01-02
1/2 BB 13.3 0.536 -10 0.76 0.030 16.35 0.644 130 5 150 2175 210 .141 70-400-08-01-02
5/8 BB 16.5 0.654 -12 0.84 0.033 19.50 0.768 163 61/2 130 1885 .280 .188 70-400-10-01-02
3/4 BB 19.8 0.780   1.00 0.040 22.50 0.860 180 7 110 1595 .327 .219 70-400-12-01-02
1 BB 26.4 1.040   1.00 0.040 30.10 1.190 230 9 80 1160 .524 .351 70-400-16-01-02

* For Anti-Static Grade, add 10 to the 3-digit part number e.g. 70-100- becomes 70-110

Note: Many of the sizes of hose and fittings listed above are available as ex-stock items and are priced accordingly. However, some of the less popular items are not always in stock, and may therefore incur a minimum order charge or a set-up charge for smaller quantities. Aflex Hose will advise when the enquiry is made

 

Temperature & Pressure

  • Temperature affects the Maximum Working Pressure (MWP) as listed above, so for temperatures above 130˚C reduce the MWP by 0.75% for each 1˚C above 130˚C. Example: at 180˚C, reduce the MWP by (180 - 130) x 0.75 = 37.5%.
  • Pressure Ratings above 100 Bar (1500 psi) only apply for the transfer of non-penetrating fluids. If gases or penetrating fluids are used in the application, or used during pressure testing at pressures above 100 Bar, HPG grade hose is required.
  • Maximum Working Pressures (MWP) listed are calculated on the basis of a 3:1 safety factor relative to the burst pressure, so Burst Pressure = 3 x MWP. If MWP is required based on a 4:1 safety factor (e.g EN 16643 requirement), multiply the listed value by 0.75.