JIC Fittings

37° JIC Female Fittings

End Fitting Specifications

  • SAE J514 37˚ Flare JIC Female Fitting
  • 37˚ JIC Male-to-NPT Male/Female Adaptors
  • NPT Threads to ANSI/AMSE B1.20.1

Temperature and Pressure Ratings

Note: Not usable with SAE 45˚ Flare fittings which have the same thread.

End Fitting Materials

  • Spigots in Grade 316L SS
  • Nuts in 316L SS
  • Ferrules, most in Grade 304 SS, some sizes in Grade 316L SS

Alternatives:

  • Available in other materials to special order

Surface Finish:

  • All surface finishes are to ASME BPE-SF-O (No finish required).
  • If a specified finish on a particular surface is required, please state on the enquiry and order.
Nominal Hose Size 37° JIC Thread Size *Fitting Length A Hex Size H Fitting Inner Diameter I Weight of Fitting
in mm in in mm in mm in mm Kg Lbs
1/2 13  3/4 - 16 1.57 40 0.88 22.2 0.37 9.40 0.09 0.20
3/4   20 11/16 - 12 1.89 48 1.25 31.7 0.62 15.75 0.20 0.44
1    25 15/16 - 12 2.28 58 1.50 38.1 0.85 21.50 0.30 0.66
11/2  40 17/8 - 12 2.72 69 2.25 57.1 1.25 31.75 0.62 1.37
2       50 21/2 - 12 3.27 83 2.88 73.0 1.76 44.60 1.10 2.42

 

JIC to NPT Male Union (including a JIC Male to NPT Male Adaptor)

Nominal Hose Size *Male Union Length A1 Weight of Fitting
in mm in mm Kg Lbs
1/2 13 2.95 75 0.17 0.37
3/4 20 3.74 95 0.34 0.75
1 25 4.49 114 0.64 1.40



JIC to NPT Female Union (including a JIC Male to NPT Female Adaptor)

*Female Union Length A2 Fitting Inner Diameter Weight of Fitting
in mm in mm Kg Lbs
3.07 78 2.95 75 0.17 0.37
3.78 96 3.74 95 0.34 0.75
4.17 106 4.49 114 0.64 1.42