Male Fittings

End Fitting Specifications

  • Generally in accordance with A-A-59326 (replaces MIL-C-27487) and EN14420-1 (replaces DIN 2828), and all are fully interchangeable.

Temperature and Pressure Ratings

  • Temperature and pressure determined by the type of gasket in the Female connecting component and the hose grade.

End Fitting Materials

  • Fittings in Grade 316L SS
  • Ferrules, most in Grade 304 SS, some sizes in Grade 316L SS
  • Adaptor Flange Only in Grade 304 SS

Surface Finish: (Non-Lined Fittings only)

  • All surface finishes are to ASME BPE-SF-O (No finish required).
  • If a specified finish on a particular surface is required, please state on the enquiry and order.
Non-Lined Cam & Groove Male Fitting​
Non-Lined Cam & Groove Male Fitting​
Integral PTFE Lined Cam & Groove Male Fitting
Integral PTFE Lined Cam & Groove Male Fitting
Nominal Hose Size Outside Diameter D Non-Lined Fitting Length A Non-Lined Inside Diameter I PTFE Lined Fitting Length AL PTFE Lined Inside Diameter B
Weight of Fitting Non-Lined
Weight of Fitting PTFE Lined
in mm in mm in mm in mm in mm in mm Kg Lbs Kg Lbs
3/4 20 1.26 32.0 2.40 61.0 0.62 15.75 2.82 71.58 0.71 18.6 0.22 0.49 0.35 0.77
1 25 1.46 37.0 3.00 77.0 0.85 21.50 3.74 95 0.81 20.7 0.33 0.72 0.45 0.99
11/4 32 1.79 45.5 3.54 90.0 1.03 26.21 3.62 92 0.97 24.8 0.57 1.25 0.45 1.09
11/2 40 2.11 53.5 3.70 94.0 1.25 31.75 3.98 101 1.35 33.5 0.78 1.71 0.84 1.85
2 50 2.48 63.0 4.45 113.0 1.76 44.60 4.61 117 1.72 41.5 1.08 2.37 1.10 2.42
21/2 65 2.98 75.8 4.13 105.0 2.23 56.6 6.50 165 2.17 55.0 1.22 2.68 1.17 2.57
3 80 3.60 91.5 4.76 120.8 2.87 73.0 6.98 177.4 2.84 72.2 1.79 3.94 1.45 3.20

 

PTFE Lined Male Cam & Groove X Flange Adaptors

Cam Action Adaptor Size Flange Size & Specification øD A øI Weight of Fitting
in mm   in mm in mm in mm Kg Lbs
1 25 1” ANSI 150 2.00 50 41/8 105 0.84 21 1.246 2.75
1 25 DN25/PN16 2.58 64 41/8 105 0.84 21 1.538 3.39
1 1/2 40 11/2” ANSI 150 2.87 73 43/8 118 1.35 34 2.228 4.92
1 1/2 40 DN40/PN16 3.47 88 43/8 118 1.35 34 2.753 6.07
2 50 2” ANSI 150 3.63 92 43/8 118 1.69 43 3.359 7.40
2 50 DN50/PN16 4.00 102 43/8 118 1.69 43 3.714 8.19

Note: Other Flange Specifications and Pressure Ratings are also available. Non-Lined adaptors and Female Cam & Groove X Flange Adaptors are also available, to special order.