Female Fittings

End Fitting Specifications

  • Generally in accordance with A-A-59326 (replaces MIL-C-27487) and EN14420-1 (replaces DIN 2828), and all are fully interchangeable.

 

End Fitting Materials

  • Spigot in Grade 316L SS
  • Body in Grade 316C SS
  • Ferrules, most in Grade 304 SS, some sizes in Grade 316L SS
  • Standard Gasket is Buna N (Nitrile) Rubber.
  • FEP encapsulated Silicone Rubber Gaskets also available.

Surface Finish: (Non-Lined Fittings only)

  • All surface finishes are to ASME BPE-SF-O (No finish required).
  • If a specified finish on a particular surface is required, please state on the enquiry and order.

Temperature and Pressure Ratings

  • When used with a Buna N Gasket all sizes up to 16 Bar (230 psi) and up to a maximum temperature of 65˚C (149˚F).
  • When used with FEP, Fluoro Rubber or other encapsulated gaskets all sizes up to 10 Bar (145 psi) and up to a maximum temperature of 204˚C (400˚F).

90˚Elbow Cam & Groove Fittings (PTFE Lined Only)

  • 90˚ Elbow Integral PTFE lined Cam & Groove Fittings are available for sizes 1”, 11/2” and 2” - Consult Aflex Hose for details.

 

Notes for Integral PTFE Lined Fittings Only:

  • FEP Gaskets require higher clamping forces to flatten the Seal and make the joint. This is made easier by ‘pre-setting’ these gaskets by clamping Polypropylene Cam Male Inserts to the assembled fittings, which must then be kept in place during storage, until use.
  • Any Customer’s Own ‘Special’ Gaskets must be pre-supplied to Aflex for special assembly and testing of hose assemblies, to ensure suitability.

 

Swivelling, Locking Arm Female Cam and Groove Fittings
- Non-Lined

Nominal Hose Size *Fitting Length A Cam Sleeve Inside Diameter D Fitting Inside Diameter I Weight of Fitting
in mm in mm in mm in mm Kg Lbs
3/4 20 2.10 53.00 1.26 32.0 0.62 15.75 0.58 1.28
1 25 2.32 59.00 1.45 37.0 0.85 21.50 0.72 1.58
1 1/4 32 2.54 64.60 1.81 46.0 1.03 26.21 1.10 2.42
1 1/2 40 2.65 67.20 2.12 54.0 1.25 31.75 1.21 2.66
2 50 3.11 79.00 2.52 64.0 1.76 44.60 1.48 3.26
21/2 65 2.99 76.00 3.01 76.5 2.25 57.15 1.42 3.12
3 80 2.80 71.00 3.63 92.2 2.63 66.70 1.88 4.14

 

Fixed or Swivelling, Locking Arm Female Cam and Groove Fitting
- Integral PTFE Lined

Nominal Hose Size *Fitting Length A Cam Sleeve Inside Diameter D Fitting Inside Diameter I Weight of Fitting
in mm in mm in mm in mm Kg Lbs
3/4 20 2.16 54.75 1.26 32.0 0.76 18.6 0.42 0.93
1 25 2.72 69.00 1.46 37.0 1.01 25.2 0.59 1.30
1 1/4 32 2.56 65.50 1.81 46.0 1.26 32.0 0.98 2.16
1 1/2 40 2.61 66.35 2.13 54.0 1.53 38.6 1.15 2.50
2 50 2.97 75.35 2.52 64.0 2.03 51.2 1.40 3.08
*21/2 65 5.31 135.0 3.01 76.5 2.36 60.0 1.17 2.57
*3 80 5.45 138.4 3.63 92.2 2.87 73.0 1.40 3.07

*PTFE Lined 21/2" and 3" sizes are fixed only