How to Order

The quantity, hose size, liner, braid, cover, protection system, length and fittings must be selected and specified in full.

EITHER by a full, written description. The hose grade can be specified by the code initials e.g. “Corroflon AS, SS, RC, DRC-300” defines an antistatic PTFE lined hose with an EPDM rubber cover over a SS braid, with a double rubber cover at both ends.

The quantity, length and fittings can then be written in - e.g. “4 off x 1” bore Corroflon, AS, SS, RC, DRC-300 hose x 3.00 metres long (10ft). Both ends non-lined ANSI 150# S/S Flanges”.

OR by Part Numbers.

Any special requirements relating to the hose construction, or information required on Tags, or Certificates, or special testing of requirements, must be specified in full on the enquiry or purchase order.

Selecting the Hose Grade

PTFE Liners include, Standard (GP) or Special Purpose (SP), both available either in natural white PTFE or in black, Antistatic PTFE (AS). There are four types of braid, Grade 304 stainless steel (SS) polypropylene (PB), Hastelloy (HB), PVDF or Kynar (KYB). Rubber covering and other external protection systems are also available.

A hose grade is specified by using the abbreviations given. For example, Bioflex AS,PB would describe a hose with an anti-static PTFE liner and a polypropylene braid.

Note: Most of the sizes of hose and fittings listed in this brochure are available as ex-stock items and are priced accordingly. However, when certain items have not been purchased in the last 12 months, they are no longer held in stock, and are only available to Special OrderAflex Hose will advise accordingly when enquiries are placed for these items.

Selecting the End Fittings

Corroflon is available with a range of ‘standard’ end fittings, both integral PTFE lined and non-lined

Stainless Steel End Fitting Materials

Non-Lined Spigots - are all made from Grade 316L SS

PTFE Lined Spigots - are all made from Grade 316L or Grade 316C SS

Cam and Groove Female Fittings - are made from Grade 316C SS (Body) and 316L SS (Spigot)

Swivelling Nuts and Flanges - are all made from Grade 304 SS

Ferrules - most ferrules are made from Grade 304 SS, except some are made from Grade 316L SS - consult Aflex Hose if necessary.

The equivalent specification for the different Grades of Stainless Steel are listed below:

Grade BS - British Standard AISI - American Standard or C = Casting Grade EN - European Norm
316L SS  BS 316 S11 AISI 316 L EN 1.4404
316C SS BS 316 C16 CF8M EN 1.440
304 SS  BS 304 S15 AISI 30 EN 1.4301

 

Conditions of Sale

Corroflon hose and hose assemblies are only supplied on the basis that the customer has read and accepted the Conditions of Sale.

Selecting the Hose Length (see also Hose Usage Limitations)

Corroflon hose assemblies are made up to the specific lengths required. The hose length is taken as the length from the sealing face at one end of the hose to the same at the other end. The length tolerance is normally +5% / -0%. Closer tolerances are available to special order.

Corroflon Hose Assembly Length Limitations
Nominal Size of Hose *Minimum Hose Assembly Length Maximum Hose Assembly Length
Used Straight Minimum at MBR
All Types TO, SS, PB, KYB RC
in mm in mm in mm in mm ft mtrs
1/2  15 3 75 2.36 60 3.54 90 100 30
3/4  20 3 75 3.19 81 4.72 120 100 30
1 25 3 75 14.33 110 6.50 165 100 30
1/4 32 3 75 5.08 129 7.64 194 100 30
1 1/2 40 3 75 6.22 158 9.29 236 100 30
2 50 3 75 8.66 220 12.99 330 100 30
1/2 65 4 100 11.02 280 16.54 420 65 20
3 80 4 100 14.25 362 21.34 542 65 20
4 100 12 300 18.58 472 27.83 707 32 10
6 150 12 300 37.13 943 55.67 1414 28 8

*  Listed minimum lengths are for the Corroflon Hose only, and DO NOT INCLUDE THE LENGTHS OF THE FITTINGS AT EACH END.

These must be found from the end fitting pages and added to calculate the minimum length of the hose assembly.
Used straight with fittings in line.
Only minimal vibration permitted.