Male Fittings

End Fitting Specification

  • Generally in accordance with A-A-59326 (replaces MIL-C-27487) and EN14420-1 (replaces DIN 2828), and all are fully interchangeable.

Temperature and Pressure Ratings

  • Temperature and pressure determined by the type of gasket in the Female connecting component.

End Fitting Materials

  • Fittings in Grade 316L SS
  • Ferrules, most in Grade 304 SS, some sizes in Grade 316L SS
  • Adaptor Flange Only in Grade 304 SS
Integral PTFE Lined Cam & Groove Male Fitting
Integral PTFE Lined Cam & Groove Male Fitting
Non-Lined Cam & Groove Male Fitting
Non-Lined Cam & Groove Male Fitting
Nominal Hose Size øD Fitting Length A  Non-Lined Inside
Diameter I
Lined Inside
Diameter B
Weight of Fitting
in mm in  mm in  mm in  mm in  mm Kg Lbs
3/4 20 1.26 32 3.38 86 0.63 15.88 0.70 17.78 0.40 0.88
1 25 1.46 37 3.66 93 0.80 20.24 0.88 22.35 0.49 1.08
11/ 40 2.13 54.0 5.00 127 1.25 31.75 1.12 28.50 0.81 1.78
50 2.52 64 5.67 144 1.75 44.45 1.77 44.96 1.05 2.31

*Fitting Lengths listed are for Corroflon braided only hose grades (SS, PB, HB, KYB). Approximately 33% longer lengths apply to the rubber covered hose grades (RC, SI, FP).

 

PTFE Lined Male Cam and Groove X Flange Adaptors

Cam Action
Adaptor Size
Flange Size & 
Specification
øD A I Weight of Fitting
in mm in mm in mm in mm Kg Lbs
1 25 1"ANSI/1507 2.00 50 1/8 105 0.84 21 1.246 2.75
1 25 DN25/PN16 2.58 64 1/8 105 0.84 21 1.538 3.39
1/2 40

11/2"ANSI/1507

2.87 73 4 3/8 118 1.35 34 2.228 4.92
1/2 40 DN40/PN16 3.47 88 4 3/4 118 1.35 34 2.753 6.07
2 50 2" ANSI/1507 3.63 92 4 3/4 118 1.69 43 3.359 7.40
2 50 DN50/PN16 4.02 102 4 3/4 118 1.69 43 3.714 8.19

Note: Other Flange Specifications and Pressure Ratings are also available. Non-Lined adaptors and Female Cam and Groove X Flange Adaptors are also available, to special order.