BSP 60° Cone Seat Female Fittings

End Fitting Specification

  • BSPP Threads to British Standard Pipe Parallel Thread design to BS21, 60˚ Cone Seat design, or Flat Seat.
  • Available in sizes up to 4"

Alternatives - Cone Seat Female Union Fittings can be supplied with a BSPP/BSPT Taper Male Adaptor if required.

End Fitting Materials

  • Spigots in Grade 316L SS
  • Nuts in Grade 316L SS
  • Ferrules, most in Grade 304 SS, some sizes in Grade 316L SS

Alternatives

  • Cone Seat Female Unions can be supplied in Zinc Plated Carbon Steel if required.
  • Lug Nuts can be supplied in Gun Metal (Bronze) if required.

 

BSP 60˚ Cone Seat Female Union Fitting

Nominal Hose Size NPT or BSPT
Thread Size
*Fitting Length A Fitting Inside
Diameter I
Weight of Fitting
in  mm in  in  mm in  mm Kg Lbs
1/2 13 1/2 21/2 63 0.37 9.35 0.11 0.25
3/4 20 3/4 31/2  89 0.63 15.88 0.15 0.34
1 25 1 31/2  89 0.80 20.24 0.24 0.53
11/2 40 11/2 37/8 98 1.25 31.75 0.72 1.59
2 50 2 4 100 1.75 44.45 0.99 2.19

 

BSP Flat Face Lug Nut Female Fitting

Nominal Hose Size BSPP Thread Size *Fitting Length A Fitting Bore Diameter I Weight of Fitting
in  mm in in  mm in  mm Kg Lbs
1 25 1 2.72 69 0.80 20.24 0.25 0.55
1 1/2 40 1 1/2 3.78 96 1.25 31.75 0.61 1.33
2 50 2 3.90 99 1.75 44.45 0.88 1.95

*Fitting Lengths listed are for Corroflon braided only hose grades (SS, PB, HB, KYB). Approximately 33% longer lengths apply to the rubber covered hose grades (RC, SI, FP)