Female

End Fitting Specifications

  • Generally in accordance with A-A-59326 (replaces MIL-C-27487) and EN14420-1 (replaces DIN 2828), and all are fully interchangeable.

End Fitting Materials

  • Spigot in Grade 316L SS
  • Body in Grade 316C SS
  • Ferrules, most in Grade 304 SS, some sizes in Grade 316L SS
  • Standard Gasket is Buna N (Nitrile) Rubber.
  • FEP encapsulated Silicone Rubber Gaskets also available.

Surface Finish: (Non-Lined Fittings only)

  • All surface finishes are to ASME BPE-SF-O (No finish required).
  • If a specified finish on a particular surface is required, please state on the enquiry and order.

Temperature and Pressure Ratings

  • When used with a Buna N Gasket all sizes up to 16 Bar (230 psi) and up to a maximum temperature of 65˚C (149˚F)
  • When used with FEP, Fluoro Rubber or other encapsulated gaskets all sizes up to 10 Bar (145 psi) and up to a maximum temperature of 204˚C (400˚F). 

90˚Elbow Cam & Groove Fittings (PTFE Lined Only)

  • 90˚ Elbow Integral PTFE lined Cam & Groove Fittings are available for sizes 1”, 11/2” and 2” - see 90˚ Elbow Fittings.

Notes: For Integral PTFE Lined Fittings Only

  • FEP Gaskets require higher clamping forces to flatten the Seal and make the joint. This is made easier by “pre-setting” these gaskets by clamping Polypropylene Cam Male Inserts to the assembled fittings, which must then be kept in place during storage, until use.
  • Any Customer’s Own “Special” Gaskets must be pre-supplied to Aflex for special assembly and testing of hose assemblies, to ensure suitability.

 

Swivelling, Locking Arm Female Cam and Groove Fittings
- Non-Lined

Nominal Hose Size *Fitting Length A (RC) Cam Sleeve Inside Dia. D Fitting Inside Diameter I Weight of Fitting
in mm in mm in mm in mm Kg Lbs 
3/4 20 3.22 82.0 1.260 32 0.625 15.88 0.54 1.19
1 25 3.39 86.5 1.456 37 0.797 20.24 0.71 1.56
11/4 32 3.86 98.0 1.810 46 1.03 26.21 1.20 2.64
11/2 40 3.97 101.0 2.126 54 1.25 31.75 1.23 2.71
2 50 4.09 104.0 2.520 64 1.75 44.45 1.52 3.35
**21/2 65 2.99 76.0 3.010 76.5 2.25 57.15 1.42 3.12
**3 80 2.80 71.0 3.630 92.2 2.63 66.70 1.88 4.14

 

Fixed or Swivelling, Locking Arm Female Cam and Groove Fitting
- Integral PTFE Lined

Nominal Hose Size Fitting Length A (RC) Cam Sleeve Inside Dia.D Fitting inside Diameter I   Weight of Fitting
in mm in mm in mm in mm Kg Lbs 
3/4 20 2.155 54.75 1.260 32.0 0.76 19.4 0.42 0.93
1 25 2.716 69.00 1.456 37.0 1.01 25.7 0.59 1.30
11/4 32 2.560 65.50 1.810 46.0 1.26 32.0 0.98 2.16
11/2 40 2.612 66.35 2.126 54.0 1.53 38.9 1.15 2.50
2 50 2.966 75.35 2.520 64.0 2.03 51.6 1.40 3.08
21/2 65 5.310 135.0 3.010 79.5 2.36 60.0 1.17 2.57
3 80 5.450 138.4 3.630 92.2 2.87 73.0 1.40 3.07

 * Fitting lengths listed are for Bioflex Ultra RC, SI and BK hose grades. Shorter lengths apply for other hose grades.
** Non-Lined 21/2" and 3" sizes are only available as Direct Crimp Fittings